Archives: Projects
Compression load test services
Prem Holdings conducted compression load test on client's newly fabricated stands. Test was conducted by replicating the point load on the stand to avoid any unwanted incident with the actual asset. We conducted the test with our portable compression test jig at client's yard. This...
Continue Reading
FABRICATION – SATELLITE DOME STAND ONBOARD VESSEL (BORNEO IV)
When a request was placced to do aluminium welding of a satellite dome stand for a vessel in Kemaman. We got the team together and had it done in 2 days and also assisted with the insttallation onboard the vessel. Do you need such aluminium...
Continue Reading
Site Inspection for Crane Wire Rope Failure – Genting Construction
When problems like protruded strand, wire rope crushed protruded core, and broken wire appears on a crane. We assist with an onsite inspection and followed up with a detailed report on the error for the crane owners. This helps them to provide perfect permanent solutions...
Continue Reading
Load Test for EPCC OF BIOMETHANE ENTRY STATION
We conducted a load test for the client's newly fabricated Cabin that will be used in the EPCC OF BIOMETHANE ENTRY STATION PHASE 1'19 (BES-COR)project. The Cabin was rigged for testing up to 10.5MT and held for 5 minutes. The test was conducted at the...
Continue Reading
50ton Loadcell repair and calibration
When a client of ours had their loadcell antenna broken and also submerged in the water by accident. They had to have them repaired and they engaged us we delivered the service to our best. The load cell was opened and had a thorough check...
Continue Reading
ONSITE INSPECTION – RIGGING GEARS
We conducted onsite periodic inspections for rigging gears and appliances as per the private port requirement in the Lumut, Perak. All rigging gears are inspected at the client yards in accordance with ASME, BSEN, and other known international standards for the products manufactured or made....
Continue Reading
Load Test For Client’s Lifting Frame up to 25MT
We conducted a load test for the client's newly fabricated lifting Frame units that are to be used in the Construction works for precast lifting. The lifting frame was rigged and tested up to 25MT. The test was conducted at the client's yard, where we...
Continue Reading
Load Test For (MRL 128 & 130 FPSO & CDW)
We conducted a load test for 12 units of newly fabricated units that are to be used in the MRL 128 & 130 FPSO & CDW project. Each unit was rigged up differently and was tested at different test loads as per design from 1.1MT...
Continue ReadingAll Rights Reserved Copyright © 2022 Lifting and Rigging | Powered by Prem Holdings Sdn Bhd (1388059-D)